Overview
Teamgo allows you to integrate Bluetooth breathalyzer devices into your visitor, employee, and contractor check-in workflows.
By incorporating alcohol testing into the sign-in process, organisations can perform alcohol screening before granting individuals access to their workplace or site. This helps support workplace safety policies and provides a more consistent approach to managing alcohol-related risks.
This guide explains how to connect a Bluetooth breathalyzer to your Teamgo kiosk and incorporate breathalyzer testing into your check-in workflow.
Benefits of Integrating Breathalyzer Testing
Integrating breathalyzer testing into your check-in process offers several benefits:
Improved workplace safety: Screen visitors, employees, and contractors for alcohol before they enter designated work areas.
Consistent screening procedures: Apply the same alcohol screening process to everyone entering your premises.
Check-in workflow: Incorporate breathalyzer testing directly into the sign-in process, reducing the need for separate manual procedures.
Better compliance management: Support workplace alcohol policies by incorporating screening into your visitor and contractor management procedures.
Recorded test results: Capture the breathalyzer result as part of the check-in process, providing a record for workplace management and reporting.
Before You Begin
Make sure you have the following:
An iPad or Android tablet/tv running the latest available iPadOS or Android OS.
The latest version of the Teamgo Kiosk app.
A supported Bluetooth breathalyzer device.
Important:
The breathalyzer connects to the kiosk device via Bluetooth through the Teamgo Kiosk app.
If you intend to print visitor badges automatically during check-in, connect your Brother printer before connecting the breathalyzer.
The breathalyzer should not already be paired with the kiosk device through the device's Bluetooth settings. Previous breathalyzer pairings should be removed before connecting through Teamgo.
Step 1: Remove Existing Bluetooth Breathalyzer Pairings
Before connecting the breathalyzer through Teamgo, make sure it is not already paired with your kiosk device through the standard Bluetooth settings.
For Apple iPad:
Open the Settings app.
Select Bluetooth.
Check the list of connected and previously paired devices.
If a breathalyzer appears, tap the information (ⓘ) icon beside it.
Select Forget This Device and confirm.
Repeat for any other previously paired breathalyzers.
For Android tablets and Android TVs:
Open the device's Settings menu.
Navigate to Bluetooth or Connected Devices (the menu name may vary depending on the device).
Check the list of paired devices.
Select any previously paired breathalyzer.
Choose Unpair, Forget, or Remove Device, depending on the device.
Repeat for any other previously paired breathalyzers.
You can leave the printer connected.
Once completed, the breathalyzer should no longer appear as a connected or previously paired device in the kiosk device's Bluetooth settings.
Step 2: Update the Teamgo Kiosk App
Make sure you are running the latest version of the Teamgo Kiosk app.
For Apple iPads:
Open the Apple App Store.
Search for the "Visitor Management Kiosk" app.
If an update is available, tap Update.
For Android tablets and Android TVs:
Open the Google Play Store.
Search for the "Visitor Management Kiosk" app.
If an update is available, select Update.
Once updated, open the app and log in using your Teamgo administrator credentials.
Step 3: Connect Your Devices
Open the Teamgo Kiosk app and navigate to the Settings screen.
3.1 Connect Your Brother Printer (Optional)
If you want visitor badges to print automatically as part of the check-in process, connect your Brother label printer first.
Follow our printer setup guides:
Important: Complete the printer connection before proceeding to the breathalyzer setup. If you do not require automatic badge printing, you can skip this step.
3.2 Initial Breathalyzer Setup
Access the setup menu on your Breathalyzer device by pressing and holding the up and down keys simultaneously for approximately 5 seconds whilst in the idle screen mode.
The menu screen will be displayed during this process and then the password set-up code ‘00000000’ will be displayed.
Press the test key until the cursor is under the fifth ‘0’.
ress the up key until that number is ‘5’.
Press the test key until the Setup menu is displayed.
Press the down key and choose “Bluetooth Comms”.
Make sure “Enable Bluetooth” is set to “Yes”.
Select “Serial”.
Select “Auto Send Standard”.
Make sure “Auto Send Standard” is set to “All”.
Select “Auto Send Passive”.
Make sure “Auto Send Passive” is set to “All”.
In the Setup Menu select “User Menu Setup”.
Look for “Enable Bluetooth Comms” and use the test key to set it to Yes
3.3 Connect Your Breathalyzer
Once your printer is connected (if applicable), proceed with the breathalyzer setup.
On the Breathalyzer, select “Bluetooth Comms” (See 1-6 above) and then “Pairing” in the user menu. The Breathalyzer will display “Searching….”.
Ensure Bluetooth is enabled on your kiosk device.
In the Teamgo Kiosk app, navigate to Settings.
Log into the kiosk app and click Settings on the left sidebar, or
Tap the bottom-right corner of the kiosk home screen, click on the gear, input the password associated with the email shown on the pop-up window, tap settings, and click on Setting on the left sidebar.
Tap the Breathalyzer option and the system will search for the Breathalyzer.
A selection slider will open at the bottom of the screen. Click the serial number of your device
Type the PIN shown on the screen of the Breathalyzer into the pop-up window on the kiosk app, and click Pair
Run a quick Breathalyzer test regardless of whether the kiosk app says the Breathalyzer is connected or not.
3.4 Test the Breathalyzer Connection
Before configuring your kiosk workflow, test the breathalyzer to confirm that it is communicating correctly with the Teamgo app.
Keep the Teamgo app open on the Settings screen.
Perform a test using the breathalyzer.
Check that the test result is displayed on the kiosk settings screen. You should see the corresponding Pass or Fail result displayed.
Note: You can perform this test directly from the Settings screen. You do not need to load or configure a kiosk design first. If the test result appears correctly, your breathalyzer is successfully connected.
Step 4: Add Breathalyzer Testing to Your Kiosk Workflow
Once the breathalyzer is connected, you can configure when alcohol testing should take place during the check-in process.
Log in to your Teamgo web dashboard.
Navigate to Sign In Points and select the kiosk you want to configure.
Open the kiosk workflow designer.
Add the Breathalyzer Check screen to your desired check-in workflow.
Position the breathalyzer screen at the appropriate point in the workflow.
Configure the required settings, including the pass/fail conditions and the actions to take depending on the test result.
Save your changes.
You can configure the workflow before connecting the breathalyzer if preferred. However, if you make workflow changes after the kiosk has already been loaded, reload the kiosk to apply the latest configuration.
Troubleshooting
If your breathalyzer does not connect or the test results are not appearing:
Check that Bluetooth is enabled on your kiosk device.
Confirm that the breathalyzer is switched on, sufficiently charged, with Bluetooth enabled.
Make sure the breathalyzer has not already been paired through the kiosk device's Bluetooth settings.
Confirm that you are using the latest version of the Teamgo Kiosk app.
If you recently changed the kiosk workflow, reload the kiosk to apply the latest configuration.
Close and reopen the Teamgo Kiosk app, then try connecting again. If same, reboot both the kiosk device and the breathalyzer.
If the problem persists, contact Teamgo Support for assistance.






